G-MF5TQ9V6NY

Corroded Panels

Corroded Electrical PanelAre you having power go out intermittently? Are some lights and receptacles working in some rooms while others are not? Are some outlets going out randomly, then coming back on again?

You may have a problem with corrosion at the meter main distribution panel outside.

Our salty air combined with humidity causes the aluminum wire connections at the panels to collect salt crystals and break down the conductive wires and termination points, causing weak conductivity or a break altogether. This could be a fire hazard. There could be a hot spot from an electrical arc or exposed live wires, not just the lights going out.

Solution? After determining that indeed the problem is the above with a diagnostic check; first, we need to call the utility company and have an on-call service man to come out and turn off the power coming in from the pole. Next, one of our licensed electricians will be there to clean off the metal parts inside the meter panel box. He will scrub the corroded aluminum electrical metal parts with a wire brush, cover the metal with a special spray to inhibit future corrosion, and then apply an antioxidant material to the jaws of the meter clips and wire screw down points. Finally, tighten everything up and have the utility man plug the meter back in.

Now that should do it.

No comments yet.

Leave a Reply

G-MF5TQ9V6NY